The Flame Sensor Module can spot flames in the range of the 760 – 1100 nanometer wavelength. Small flames such as a lighter flame can be quickly at about 0.8m. The angle of the detection is about 60 degrees and the sensor is chiefly sensitive to the spectrum flame. Flame Sensor Manufacturer in Mumbai is used as a comparator to adjust the sensitivity level. The digital sensor has a digital and analog output and understanding can be adjusted through the blue potentiometer.
The Flame Sensor Module is utilized to notice fire/flame source or another light basis of the wavelength in the choice of 760nm – 1100 nm. It depends on the special sensor which is a high speed and NPN silicon phototransistor. The black epoxy, sensor is sensitive to infrared energy.
The sensor offered by Wholesale Flame Sensor Supplier in Mumbai can be a huge addition to a firefighting robot; it can be utilized as a robot's eyes to discover the fire basis. When the sensor notices flame the Signal LED will illumine and the D0 pin moves to LOW.
Flame Sensor Exporters India of the module has 2 outputs: Analogue, which allows a real-time voltage output indication on thermal resistance, and digital which permits temperature thresholds to be position via a potentiometer.
|Power||15w, 20w, 25w|
|Alarm Range||1.5mtr, 1mtr, 2.5mtr, 2mtr|
|Cable length||2, 4m|
307, Vikrant Industrial Estate, Govandi Po Road, Deonar, Govandi, Mumbai, Maharashtra - 400088, India
E-mail : firstname.lastname@example.org